20 Best Mmdvm Raspberry Pi 3 of 2022

Are you looking for the best Mmdvm Raspberry Pi 3? Based on expert reviews, we ranked them. We've listed our top-ranked picks, including the top-selling Mmdvm Raspberry Pi 3.


Having trouble finding a great Mmdvm Raspberry Pi 3?


This problem is well understood by us because we have gone through the entire Mmdvm Raspberry Pi 3 research process ourselves, which is why we have put together a comprehensive list of the best Mmdvm Raspberry Pi 3s available in the market today.


After hours of searching and using all the models on the market, we have found the best Mmdvm Raspberry Pi 3 for 2022. See our ranking below!

We Recommended:

#PreviewProduct
1
C4Labs ZRPi-3.5NSX Nextion Screen Case – Raspberry Pi 3 B+, ZUMspot MMDVM, and Enhanced 3.5'...
C4Labs ZRPi-3.5NSX Nextion Screen Case – Raspberry Pi 3 B+, ZUMspot MMDVM, and Enhanced 3.5″…
2
C4 Labs DRPi-3.5NSX Nextion Screen Case – Raspberry Pi 3 B+, Duplex MMDVM v1.0, and Enhanced 3.5'...
C4 Labs DRPi-3.5NSX Nextion Screen Case – Raspberry Pi 3 B+, Duplex MMDVM v1.0, and Enhanced…
3
AURSINC MMDVM Hotspot Board + Antenna Support UHF VHF Support P25 DMR YSF DSTAR NXDN POCSAG for...
AURSINC MMDVM Hotspot Board + Antenna Support UHF VHF Support P25 DMR YSF DSTAR NXDN POCSAG for…
4
C4Labs DRPi-1NSX case for Raspberry Pi 3 B+, Duplex MMDVM v1.0, 2.4″ Enhanced Nextion Screen...
C4Labs DRPi-1NSX case for Raspberry Pi 3 B+, Duplex MMDVM v1.0, 2.4″ Enhanced Nextion Screen…
5
Hima MMDVM Hotspot Spot Radio Station+ Antenna+OLED+ Black Case with Screen Support P25 DMR YSF...
Hima MMDVM Hotspot Spot Radio Station+ Antenna+OLED+ Black Case with Screen Support P25 DMR YSF…
6
MMDVM Hotspot Board + Aluminium Case Support UHF VHF Support P25 DMR YSF DSTAR NXDN POCSAG for...
MMDVM Hotspot Board + Aluminium Case Support UHF VHF Support P25 DMR YSF DSTAR NXDN POCSAG for…
7
sb components Raspberry Pi 3 Model B+ Transparent Case - Access to All Ports
sb components Raspberry Pi 3 Model B+ Transparent Case – Access to All Ports
8
Zebra DRPi-1S .096 Screen Case – Raspberry Pi 3 B+ and Duplex MMDVM (Black Ice)
Zebra DRPi-1S .096 Screen Case – Raspberry Pi 3 B+ and Duplex MMDVM (Black Ice)
9
AURSINC MMDVM Duplex Hotspot Module Dual Hat V1.3 Support P25 DMR YSF NXDN DMR Slot 1 + Slot 2 for...
AURSINC MMDVM Duplex Hotspot Module Dual Hat V1.3 Support P25 DMR YSF NXDN DMR Slot 1 + Slot 2…
10
C4Labs ZRPi-1AS case for Raspberry Pi 3 B+ and ZUMspot with Attached 1.3 OLED
C4Labs ZRPi-1AS case for Raspberry Pi 3 B+ and ZUMspot with Attached 1.3 OLED
11
Nicedea MMDVM Hotspot Board DMR P25 YSF DSTAR Board Compatible with Raspberry Pi 3 Raspberry Pi Zero...
Nicedea MMDVM Hotspot Board DMR P25 YSF DSTAR Board Compatible with Raspberry Pi 3 Raspberry Pi…
12
C4Labs JRPi-3.5NSX Nextion Screen Case for Raspberry Pi 4B & 3B+, Jumbospot MMDVM, and 3.5' Nextion...
C4Labs JRPi-3.5NSX Nextion Screen Case for Raspberry Pi 4B & 3B+, Jumbospot MMDVM, and 3.5″…
13
C4Labs Zebra ZRPi-1NSX Nextion Screen Case fits Raspberry Pi 3 B+ (not Included), ZUMspot MMDVM (not...
C4Labs Zebra ZRPi-1NSX Nextion Screen Case fits Raspberry Pi 3 B+ (not Included), ZUMspot MMDVM…
14
HCDC RPi GPIO Status LED & Terminal Block Breakout Board HAT for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B
HCDC RPi GPIO Status LED & Terminal Block Breakout Board HAT for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B
15
RS Components Raspberry Pi 3 B+ Motherboard
RS Components Raspberry Pi 3 B+ Motherboard
16
Hotspot Module, USB Wireless Multi-Mode Hotspot Expansion Board + Antenna + LED Screen + Case,...
Hotspot Module, USB Wireless Multi-Mode Hotspot Expansion Board + Antenna + LED Screen + Case,…
17
Raspberry Pi RPI3CASE-BG Official Raspberry Pi 3 Case, Black/Grey
Raspberry Pi RPI3CASE-BG Official Raspberry Pi 3 Case, Black/Grey
18
Unistorm Raspberry Pi 3 Model B+ Case Aluminum Case Silver Case Compatible with Raspberry Pi 3 Model...
Unistorm Raspberry Pi 3 Model B+ Case Aluminum Case Silver Case Compatible with Raspberry Pi 3…
19
C4Lab - JRZ-1S case for Raspberry Pi Zero/Zero W & JumboSPOT or Lonestar MMDVM Simplex
C4Lab – JRZ-1S case for Raspberry Pi Zero/Zero W & JumboSPOT or Lonestar MMDVM Simplex
20
CanaKit Raspberry Pi Zero W (Wireless) Complete Starter Kit - 16 GB Edition
CanaKit Raspberry Pi Zero W (Wireless) Complete Starter Kit – 16 GB Edition

20 Best Mmdvm Raspberry Pi 3 Reviews in 2022

Bestseller No. 1


C4Labs ZRPi-3.5NSX Nextion Screen Case – Raspberry Pi 3 B+, ZUMspot MMDVM, and Enhanced 3.5″…

  • If you have a Generic Chinese MMDVM Board (Jumbospot) there is a new case model: JRPI-3.5NSX
  • For Raspberry Pi 4B, 3B+, 3B, 2B, and B+ (not included), ZUMspot Brand MMDVM Board (Not included), and a 3.5″ Enhanced Nextion Touchscreen (included)….
  • Please note that connecting the Nextion screen to your set-up may require additional soldering of pins or wires not covered in these case…
  • Note: This case does not have a fan and the Pi-4 is known to run hot under use. It is not recommended to run the Pi-4 at full power for extended…
  • Engineered and manufactured with Pride in Tacoma, WA USA

Bestseller No. 2


C4 Labs DRPi-3.5NSX Nextion Screen Case – Raspberry Pi 3 B+, Duplex MMDVM v1.0, and Enhanced 3.5″…

  • For Raspberry Pi 4B, 3B+, 3B, 2B, and B+ (not included), Duplex MMDVM Board V1.0 (not included), and a 3.5″ Enhanced Nextion Touchscreen NX4832K035…
  • Assembly of Case kit is required. We have carefully designed it to precisely fit these components using Laser cut parts and stainless steel hardware….
  • Please note that connecting the Nextion screen to your set-up may require additional soldering of pins or wires not covered in these case…
  • Note: This case does not have a fan and the Pi-4 is known to run hot under use. It is not recommended to run the Pi-4 at full power for extended…
  • Engineered and manufactured with Pride in Tacoma, WA USA

Bestseller No. 3


AURSINC MMDVM Hotspot Board + Antenna Support UHF VHF Support P25 DMR YSF DSTAR NXDN POCSAG for…

  • MMDVM hotspot supports UHF VHF, frequency range: 144MHz-148MHz, 420MHz-475MHz, 842MHz-950MHz (depending on ADF7021 and TCXO, HAT firmware amateur…
  • AURSINC hotspot board supports Raspberry Pi 3B, 3B +, Pi ZERO, compatible with NanoPi NEO, Orange Pi, compatible with BlueDV (requires USBtoTTL or…
  • Hotspot board saves electricity, High quality TCXO, stable, low BER. Support MMDVM mode DMR / YSF / P25 / NXDN / DSTAR / POCSAG
  • Support online upgrade, User-friendly OLED and Nextion special design location, reserved for additional installation of Bluetooth modules
  • Compatible with P4 settings:since our mmdvm board is defautly setup for Pi-Zero W, Pi 3. and if you do want to connect it with your Pi 4, you could…

Bestseller No. 4


C4Labs DRPi-1NSX case for Raspberry Pi 3 B+, Duplex MMDVM v1.0, 2.4″ Enhanced Nextion Screen…

  • Full body coverage for Raspberry Pi 3B (not included), Duplex MMDVM v1.0 dual antenna (not included), and 2.4″ Nextion Touchscreen(included). Case kit…
  • Includes a 2.4″ Enhanced Nextion Touchscreen**Please note that connecting the Nextion screen to your set-up may require additional soldering of pins…
  • The new inner layers have been designed to fit the Pimoroni Fan SHIM (not included)
  • For Raspberry Pi 3B+, 3B, 2B, and B+ (not included), Duplex MMDVM v1.0 (not included), and a 2.4″ Enhanced Nextion Touchscreen (included)
  • Designed and Crafted by Local Artists at our workshop in Tacoma, WA USA

Bestseller No. 5


Hima MMDVM Hotspot Spot Radio Station+ Antenna+OLED+ Black Case with Screen Support P25 DMR YSF…

  • Support:D-STAR, P25, DMR and work with UHF.
  • Software:Pi-Star,Suit for Raspberry Pi 3,Raspberry Pi 3b+,Raspberry Pi Zero W.The 40pin raspberry pie needs to insulate the middle 20pin pin headers…
  • Power supply: USB cable connected to your computer or laptop. The Hotspot will also work mobile in your vehicle if you Tether it to your mobile phone…
  • Basic Setup: 433.550000MHZ DMR (Need the 2.4GHz SSID as the Pi Zero W doesn’t support 5.8GHz).
  • Note: All designs will be contributed on MMDVM open source project.If you encounter a different version of pi zero not work, please s

Bestseller No. 6


MMDVM Hotspot Board + Aluminium Case Support UHF VHF Support P25 DMR YSF DSTAR NXDN POCSAG for…

  • Save electricity, High quality TCXO, stable, low BER. Note: This is NOT a completed or assembled Hotspot, it is just MMDVM Board with Aluminum case.
  • Support Raspberry Pi 3B, Pi ZERO, compatible with NanoPi NEO, Orange Pi, compatible with BlueDV (requires USBtoTTL or Bluetooth model)
  • Support VHF/UHF, frequency range: 144MHz-148MHz, 420MHz-475MHz, 842MHz-950MHz (depending on ADF7021 and TCXO, HAT firmware amateur radio brand license…
  • Support MMDVM mode DMR / YSF / P25 / NXDN / DSTAR / POCSAG
  • Support online upgrade, User-friendly OLED and Nextion special design location, reserved for additional installation of Bluetooth modules

Bestseller No. 7


sb components Raspberry Pi 3 Model B+ Transparent Case – Access to All Ports

  • This is a no-nonsense protective case designed specifically for the Raspberry Pi 3 Model B+
  • The case is a two-piece injection-moulded ABS enclosure that snaps together around the Raspberry Pi 3 Model B+
  • It provides the best available protection/accessibility for the Raspberry Pi 3 Model B+
  • Wall Mountable. Access to All ports. Please be aware of fake Chinese cases.
  • Raspbery Pi 3 Model B+ or Raspberry Pi 3 model B not included

Bestseller No. 8


Zebra DRPi-1S .096 Screen Case – Raspberry Pi 3 B+ and Duplex MMDVM (Black Ice)

  • For Raspberry Pi 3B+, 3B, 2B, and B+ (not included), Duplex MMDVM (not included), and an OLED screen (not included).
  • Full body coverage for Raspberry Pi, MMDVM DUPLEX v1.3 & v1.0, and OLED screen (not waterproof)
  • Enough room for .96 128×64 OLED screen (smaller style antenna recommended when using a screen)
  • Cut outs for easy access to SD card and ports
  • Made in Tacoma, WA USA

Bestseller No. 9


AURSINC MMDVM Duplex Hotspot Module Dual Hat V1.3 Support P25 DMR YSF NXDN DMR Slot 1 + Slot 2 for…

  • HIGH PERFORMACE: 32-bit ARM processor, up to 10mW RF power, fully tested every piece.
  • WIDELY COMPATIBLE: Supports DMR, P-25, D-Star and System Fusion
  • WORK with RASBERRY Pi: Mounts cleanly on current Raspberry Pi including the Pi Zero , NOT compatible with Rasberry Pi 4.
  • Update new FW: (pi-star / expert / ssh access / user :pi-star pass:raspberry) then run sudo pistar-mmdvmhshatflash hs_dual_hat set Jumper…
  • FREQUENCY: Radio Frequency : Freq:144-148,219-225, (Main Band) 420-475,842-950 NOTE: TX =0, RX=0. Modem select: STM32-DVM/MMDVM_HS-Raspberry pi…

Bestseller No. 10


C4Labs ZRPi-1AS case for Raspberry Pi 3 B+ and ZUMspot with Attached 1.3 OLED

  • Full body coverage for Pi and ZUMspot hat (not waterproof)
  • Can be used with a ZUMspot with or without attached 1.3″ OLED OR a JumboSPOT with attached .96″ OLED or N5BOC Lonestar Board (not included)
  • Cut outs for easy access to SD card and camera ports
  • Heatsinks and rubber feet included
  • Designed and Crafted by Local Artists in Tacoma, WA USA

Bestseller No. 11


Nicedea MMDVM Hotspot Board DMR P25 YSF DSTAR Board Compatible with Raspberry Pi 3 Raspberry Pi Zero…

  • The Hotspot will also work mobile in your vehicle if you Tether it to your mobile phone network
  • MMDVM Board is compatible with D-STAR, P25, DMR and work with UHF or VHF
  • MMDVM Hotspot Board suits for Raspberry Pi 3,Raspberry Pi Zero W
  • Power supply: Mobile charger or a USB cable connected to your computer or laptop
  • All designs will be contributed on MMDVM open source project

Bestseller No. 12


C4Labs JRPi-3.5NSX Nextion Screen Case for Raspberry Pi 4B & 3B+, Jumbospot MMDVM, and 3.5″ Nextion…

  • If you have a Zumspot Brand MMDVM Board there is a new case model: ZRPI-3.5NSX
  • For Raspberry Pi 4B, 3B+, 3B, 2B, and B+ (not included), JUMBOspot (a generic Chinese MMDVM board – Not included), and a 3.5″ Enhanced Nextion…
  • Please note that connecting the Nextion screen to your set-up may require additional soldering of pins or wires not covered in these case…
  • Note: This case does not have a fan and the Pi-4 is known to run hot under use. It is not recommended to run the Pi-4 at full power for extended…
  • Engineered and manufactured with Pride in Tacoma, WA USA

Bestseller No. 13


C4Labs Zebra ZRPi-1NSX Nextion Screen Case fits Raspberry Pi 3 B+ (not Included), ZUMspot MMDVM (not…

  • Case kit requires assembly. Designed to fit a ZUMspot OR JumboSPOT or N5BOC Lonestar Board. No boards are included.
  • Includes a 2.4″ Enhanced Nextion Touchscreen* *Please note that connecting the Nextion screen to your set-up may require additional soldering of pins…
  • The new inner layers have been designed to fit the Pimoroni Fan SHIM (not included). Heatsinks and rubber feet included
  • For Raspberry Pi 3B+, 3B, 2B, and B+ (not included), ZUMspot or JUMBOspot or N5BOC Lonestar Board (not included)
  • Designed and Crafted by local artists at our workshop in Tacoma, WA USA

Bestseller No. 14


HCDC RPi GPIO Status LED & Terminal Block Breakout Board HAT for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B

  • The item has been soldered and assembled. Support for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B
  • GPIO status LED and power 5V / 3.3V indication. GPIO output or input level high LED on, output or input level low LED off. 5V blue, 3.3V red, GPIOs…
  • Terminal block pitch 3.5mm/0.138″, wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. 2 x 20 pins expansion…
  • Packing list: 1x terminal block breakout module, 4x M2.5x16mm nylon standoffs, 4x M2.5x6mm nylon standoffs, 4x M2.5 nylon nuts(NOTE: the item not…

Bestseller No. 15


RS Components Raspberry Pi 3 B+ Motherboard

  • 1. 4GHz 64-bit quad-core ARMv8 CPU (BCM2837B0), 1 GB RAM
  • Dual band 2. 4GHz and 5GHz IEEE 802. 11. B/g/n/ac Wireless LAN
  • Bluetooth 4. 2, Bluetooth low energy
  • Poe hat support, camera interface (CSI), Display interface (DSI), 40 GPIO pins
  • Made by Rs Components and COMES in Rs Components packaging

Bestseller No. 16


Hotspot Module, USB Wireless Multi-Mode Hotspot Expansion Board + Antenna + LED Screen + Case,…

  • ▶▶MMDVM HOTSPOT BOARD KIT: WIFI board and antenna kit, is a portable wireless network router used for home WIFI, Raspberry Pi project development,…
  • ▶▶ FREQUENCY BAND SUPPORT: UHF VHF frequency range is 144MHz-148MHz, 420MHz-475MHz, 842MHz-950MHz;
  • ▶▶MMDVM MODE AND COMPATIBILITY: D-STAR / P25 / DMR etc. Support Raspberry Pi 3, Raspberry Pi Zero W.
  • ▶▶WIFI SSID: GARY / PASSWORD: (Since Pi Zero W does not support 5.8GHz, 2.4GHz SSID is required)
  • ▶▶NOTICE: PI-STAR, you can get all the software and design support for this wifi hotspot from the MMDVM related open source website, USB power…

SaleBestseller No. 17


Raspberry Pi RPI3CASE-BG Official Raspberry Pi 3 Case, Black/Grey

  • Official case for the Raspberry Pi from the Raspberry Pi foundation
  • Removable lid provides easy access to the camera and display ports
  • Removable side panels with easy access to the gpio port
  • Removable top frame
  • Designed with superior hat’s in mind

Bestseller No. 18


Unistorm Raspberry Pi 3 Model B+ Case Aluminum Case Silver Case Compatible with Raspberry Pi 3 Model…

  • Material: Aluminum Case Color: Silver
  • Support Raspberry Pi 3 Model B+, Raspberry Pi 3 Model B
  • All ports and slots of the case can match with Raspberry Pi 3 perfectly.
  • This aluminum case has exhaust hole surface. It can reach perfect heat dissipation.
  • We provide returning service. Just feel free to buy. If you have any problem, We will accept returning immediately.

Bestseller No. 19


C4Lab – JRZ-1S case for Raspberry Pi Zero/Zero W & JumboSPOT or Lonestar MMDVM Simplex

  • This is case kit. Assembly is required. No components are included.
  • Full body coverage for Raspberry Pi, JumboSPOT or LoneStar MMDVM Simplex and OLED screen (not waterproof). Note: Raspberry Pi Zero 2 has not been…
  • Cut outs for easy access to SD card and camera ports
  • Comes with 2 tops: one with antenna hole and one without
  • Pin-hole access to boot and reset buttons on top of case

Bestseller No. 20


CanaKit Raspberry Pi Zero W (Wireless) Complete Starter Kit – 16 GB Edition

  • Raspberry Pi Zero W (Wireless) Board with on-board WiFi and Bluetooth
  • Official Raspberry Pi Zero Case with 3 Interchangeable Lids
  • SanDisk 16 GB MicroSD Card (Class 10) – Pre-loaded with NOOBS
  • CanaKit 2.5A Micro USB Power Supply with Noise Filter (UL Listed) specially designed for the Raspberry Pi (5-foot cable)
  • USB OTG Cable, Mini HDMI Adapter and Heat Sink

How Do You Buy The Best Mmdvm Raspberry Pi 3?

Do you get stressed out thinking about shopping for a great Mmdvm Raspberry Pi 3? Do doubts keep creeping into your mind?

We understand, because we’ve already gone through the whole process of researching Mmdvm Raspberry Pi 3, which is why we have assembled a comprehensive list of the greatest Mmdvm Raspberry Pi 3 available in the current market. We’ve also come up with a list of questions that you probably have yourself.


ConnersVine has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Mmdvm Raspberry Pi 3 that you consider buying. Your questions might include the following:


  • Is it worth buying an Mmdvm Raspberry Pi 3?
  • What benefits are there with buying an Mmdvm Raspberry Pi 3?
  • What factors deserve consideration when shopping for an effective Mmdvm Raspberry Pi 3?
  • Why is it crucial to invest in any Mmdvm Raspberry Pi 3, much less the best one?
  • Which Mmdvm Raspberry Pi 3 are good in the current market?
  • Where can you find information like this about Mmdvm Raspberry Pi 3?

We’re convinced that you likely have far more questions than just these regarding Mmdvm Raspberry Pi 3, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.


Potential sources can include buying guides for Mmdvm Raspberry Pi 3, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Mmdvm Raspberry Pi 3. Make sure that you are only using trustworthy and credible websites and sources.


ConnersVine provides an Mmdvm Raspberry Pi 3 buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information.

How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Mmdvm Raspberry Pi 3 currently available on the market.


This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Mmdvm Raspberry Pi 3 has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Mmdvm Raspberry Pi 3?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Mmdvm Raspberry Pi 3.
  5. Customer Ratings: Number ratings grade Mmdvm Raspberry Pi 3 objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Mmdvm Raspberry Pi 3.
  7. Product Quality: You don’t always get what you pay for with an Mmdvm Raspberry Pi 3, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Mmdvm Raspberry Pi 3 is should be an indication of how long it will work out for you.


ConnersVine always remembers that maintaining Mmdvm Raspberry Pi 3 information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.


If you think that anything we present here regarding Mmdvm Raspberry Pi 3 is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly!

Related Post:

Leave a Comment

Your email address will not be published.